Description
PTFE sheet is made by technique of compacting, sintering, rotary cutting with PTFE granular resin. It exhibits good dielectric performance, anti-aging, anti-chemical corrosion ability. There are two kinds of PTFE Sheets, included PTFE skived sheet and molded sheet.
Features
•Working temp between -180°C to +260°C.
•Excellent non-sticky property, it is easier to remove any foreign articles.
•Low friction coefficient.
•Anti-chemical corrosion property.
•Excellent electrical insulation
Applications
•Cable wrapping under high voltage and high temperature.
•Sealing the electronic parts.
•Reaction kettle, storage tank, valve, container, liner and gasket
•Corrosion-resistance liner. seal, dielectric materials etc
Specification
The skived sheets exhibits better thickness tolerance than the molded sheets, and the molded sheets exhibits flatter than skived sheets
Item |
Unit |
Value |
Density |
g/cm3 |
2.1~2.3 |
Tensile strength |
Mpa |
≥15 |
Elongation |
% |
≥150 |
Dielectric strength |
KV/mm |
10 |
Resistance of surface |
Ω |
3.7x1016 |
Thickness range |
Skived |
mm |
0.1~6.0 |
Molded |
3.0~80 |
The width range |
Skived |
mm |
10~1000 |
Molded |
500~1000 |
The Length range |
Skived |
mm |
>2000/Roll* |
Molded |
500,600,1000,2000 |
Slitting and Packaging
1,Thickness:0.1mm~80mm
2 Packing: 300~700kgs/pallet (plywood, plastic, paper)
3,The length of PTFE skived sheet can over 2m or according to customer’s requirement.
Note: Above values are the accumulative typical ones by recognized testing method, but, in order to ensure you to select our products properly, please refer to above specification and test the samples based on your using purpose or feel free to contact us for more details