Polyimide Adhesive Tape (KY6250)

                    

 

                                                                                                                                           SGS (ROHS) approved No.SH6010928/CHEM

 

Polyimide Adhesive Tape with Silicone Resin (KY6250S)

This kind of tape is made of polyimide material with heat-resistant silicone adhesive, which shows excellent dielectric insulation properties, high heat resistant, excellent solvent resistant, mask-off gold finger contacts during wave soldering, short-term temp. It can work well as low as -73c and as high as 260c, widely used for electrical insulation on motor, transformer, coils, PCB making and so on.

 

Tape Color

Amber 

 

Peel Strength

> 6.2 N/25mm  *

Total Thickness

0.06mm (2.4mil)

Tensile Strength

> 135 N/25mm *

Backing Thickness

0.025mm (1mil)

Elongation

> 50 %  * 

Standard Length

33m (36yds)

Breakdown Voltage

> 7 KV *

Insulation Class

C (180c)

Resistivity

>1.0x1012 ohm

   Note:  The "*" only refer to 6250SG, Please refer to the details according to different  type.

Polyimide Adhesive Tape with Acrylic Resin (KY6240A)

This kind of tape is made of polyimide material with acrylic adhesive, which shows excellent dielectric insulation properties, high heat resistant and is widely used for electrical insulation on motor, transformer, coils and so on.

Tape Color

Amber

 

 

Peeling Strength

> 6.8 N/25mm

Overall Thickness

0.06mm (2.4mil)

Tensile Strength

> 100 N/25mm

Backing Thickness

0.025mm (1mil)

Elongation

> 50 %

Standard Length

33m (36yds)

Breakdown Voltage

> 7 KV

Insulation Class

F (155c)

Resistivity

> 1.0x1012 ohm

            

Note:

Other thickness is available based on your requirements.

Packing: Carton

Min Qty: 1000 m2 each size in a lot.

Shelf life: one year from the data of delivery. It can still be used if it is qualified by testing after one year   according to above Technical Requirement. 

Note: Above values are the accumulative typical ones by recognized testing method, but, in order to ensure you to select our products properly, please refer to above specification and test the samples based on your using purpose or feel free to contact our engineers for further and better understanding.

 

 

                       

Copyright 2004 Suzhou Kying Industrial Materials Co., Ltd
All rights reserved